Aero safety line guide.

Your Flymount Aero is supplied with a 3 metre length of high strength marine grade cord manufactured here in the UK by English Braids. Always ensure that your camera is backed up by this safety line, or an alternative lanyard.

1

Create a loop at one end of the cord.

2

Create a loop at one end of the cord.

3

Ensure loop is tight and can not come loose.

4

Feed cord end through loop.

5

Feed all the cord through until a self-tightening loop has been created.

6

Place loop over camera.

7

Position loop at base of camera.

8

Pull tight.

9

Feed opposite end of cord through hinge tube.

10

Pull tight.

11

Depending on wing shape, feed the cord end over top or bottom of wing.

12

Tie off to the neutral handle, or one of the strut handles.

13

Ensure cord is taught to avoid interference on the water.

13

Ensure cord is taught to avoid interference on the water

Wings used in the above photos are: Slingshot Dart V1 and F-one Swing.

0
0 item
My Cart
Empty Cart